skip to main |
skip to sidebar
Partitioning in computer systems refers to dividing of the storage space of hard disk in to various logical drives often called partitions. By partitioning your technique, you can make definite that the technique files and the program files are well separated by information files. Also, with the technique drive separated from other partitions there is space for the operating technique to perform virtual memory paging and swapping. In addition, if one of the partitions gets corrupted then other partitions do not get affected by this. And a partition can get affected (or corrupted) because of several reasons such as virus infections, power outages, abrupt technique shutdown, missing technique files, etc. In such cases, you ought to take appropriate corrective measures to resolve this issue. However, in case you are unable to do so, then you ought to make use of a third-party partition recovery application to recover partition.Think about a scenario wherein you are unable to boot your Windows XP-based technique. Either of the following error message is displayed:
Operating technique not found
Missing Operating Technique
In addition, when you start your technique from Recovery Console you are unable to do so. A mistake message is displayed, that is:
“Setup did not find any hard drives installed on your computer.”Cause:
For the aforementioned error messages, there could be following reasons:
The disk is not detected by the BIOS (Basic Input/Output Technique)
The hard disk is broken.
Sector 0 of the physical hard disk has a corrupt Master Boot Record (MBR).
An incompatible partition is marked as Active.
The technique drive partition containing the MBR is not active any more.
Resolution:
To resolve this issue and to access the technique, you can use either of the following methods:
Confirm the BIOS settings: In this, you ought to confirm the BIOS settings and confirm whether the hard disk is recognized by the technique or not. If yes, then restart the technique to confirm whether the issue is resolved or not. If the issue is not resolved or if BIOS is unable to detect the hard disk, then the issue is hardware related.
Use Recovery Console: Access the Windows XP Recovery Console and use fixmbr command to repair the master boot record of the technique drive partition.
However, in case you are still unable to resolve the issue then you ought to make use of a third-party partition recovery application to recover Windows partition. These tools are read-only in nature and do not overwrite the original information while scanning the damaged area.
Stellar Phoenix Windows Information Recovery is a Windows partition recovery application that lets you perform partition recovery of lost, deleted, and missing partitions. In addition, it can recover over 185 different types of files from various storage media such as hard drives, pen drives, iPods, outside HDDs, etc. This partition recovery device can recover deleted emails from MS Outlook and Outlook Express. It is compatible with Windows 7, Vista, Server 2003, XP, and 2000.
As your PC gets older and older and you install more programs and information your PC gets progressively slower and slower. One reason could be because your hard disk is becoming increasingly active. This hard disk activity may be in plenty of cases, unnecessary, often being caused by programs and the method causing windows hard disk thrashing. I will show you how to decide where this activity is occurring and who is causing it.Most people think that hard disk corruption or lack of disk space is the main cause of most method performance issues, but disk time and activity is as much a performance factor. Disk time is a percentage of time that the hard disk is in use. If the hard disk is running at 80 percent of the time, you can be sure that PC performance being affected.
One other thing to think about is the average disk queue length. This refers to the number of processes that are waiting to make use of the hard disk. Using the disk time percentage and the disk queue length will tell you how much the hard disk is being used and also if heavy usage is causing a controversy. If for example the disk time is running at 40 percent and the average disk queue length is two or less, then your hard disk is maintaining with the requests for access.
If the percentage of disk time is above 80 percent and the average disk queue length is two or more, it means that you PC processes are waiting for the hard disk to become available. If a method has to wait for any part to become available you will experience a drop in performance of your PC.
To decide in the event you have a windows hard disk thrashing issue, you need to measure the percentage of disk time and the average disk queue length.
Before you start this procedure you ought to perform a full disk defragmentation on all of your hard disk partitions. This will be sure that all the files are contiguous and that the hard disk can perform optimum reads and writes of the files.
After you have performed the defragmentation run the Performance Monitor utility by going to
Start > Control Panel > Administrative Tools and then Performance.
When the Performance Monitor opens there may be some monitor counters already running, (shown at bottom right), click on each in turn and then delete to remove them. As each counter makes use of some resources it is best to have as few running as feasible to make the measurements more correct.
In the Performance Monitor window perform the following:
* Click the + icon to open the Add Counters box.
* Click on the Performance Object dropdown list and choose PhysicalDisk. This will bring up a list of physical disk counters.
* Select the %Disk Time counter from the list and click the All Instances button. This will be sure the method will measure the performance of all the hard drives.
* Click the Add button to add the counter to the Monitor.
* Select Avg. Disk Queue Length from the counter list, and again the All Instances button. Click the Add button then the Close button. The performance monitor will then start analyzing the disk usage.
Taking a look at the monitor results, you can see that the lines shown on the graph correspond to the counters that you have selected. The pink line is the average disk queue length for the drives C: and D: which are in this case partitions on hard drive Zero. A more correct value can be obtained by selecting the counter that you need to see in more detail.
So how do you track down the method that is using all the disk resources? The first thing you need to do is raise the Windows Task Manager. You can do this by pressing -
[Ctrl][Alt][Delete]
on your keyboard holding each down in turn. The Windows task manager shows you the utilization of resources that all the processes running in the method use.Windows task manager usually has some monitor counters selected as standard but disk usage may not be one of the them. You can select which counter you need to see as follows:
* Click on the "Processes" tab at the top. This will show a list of processes that are running on your PC.
* Click on "View" in the menu at the top then on the "Select Columns".
* In the window that comes up deselect everything then select "I/O Read bytes" and "I/O Write Bytes" then "OK"
You ought to now look to see if any of the counters against the processes are changing at a fast rate. The counters ought to only change occasionally or not at all. In the event you see one that is constantly changing, then that the method may be the one that is hogging your PC's disk resources.
To kill a method that is hogging a resource, right click on the method and then select "End Process" in the menu that appears.
If the particular method is a part of the Windows XP operating method, there is a lovely chance that the high disk usage is caused by thrashing. High disk usage can be caused by "swapping and thrashing"
When the method moves memory blocks between physical and virtual memory (normally called Paging) this is swapping. This is a standard method in Windows XP. Virtual memory is space used on hard disk and as additional memory. This is completed when another method requires "Real" memory and there is not empty space in actual memory to place it. In this case the method will put a method that is in actual memory down to the paging file on disk to generate the space.
Windows hard disk thrashing is caused by high actual physical and virtual memory swapping. This is one reason why it is recommended that as much actual memory be installed on your PC as feasible.
However, if the disk usage is traced to a non-Windows method, then you may have issues with an individual service/program.
In the event you eliminate a method you feel is causing excessive disk usage, processor time and memory will even be affected.
You can now see the way you can track and identify a program or method that may be causing excessive disk time usage and the way it degrades the method. Using the Performance Monitor to measure both disk time and average queue length, you can see if the hard disk is being excessively used by the system's processes. Using the Widows Task Manager you can further decide which method that may be causing the issue.
Seeking a Fix It Utility for Windows XP? There's plenty of fix it utilities on the marketplace for repair of systems errors within the Windows XP operating process. One suggested fix it utility for the Windows XP operating process is located online at PC-utility.com, which is sponsoring the RegCure PC utility package, which has received a five-star rating from PC-utility.com for the month. The RegCure PC utility package is said to correct the widest variety of errors and to have a user-friendly wizard. Fix It Utilities for Windows XP are routinely recommended by professional IT people for those computer users who do not have the knowledge to fix and reverse errors on their computer registry without the aid of a registry utility to assist them. As a matter of fact, to try to correct errors without having the knowledge to do so is to take a chance in doing irreparable harm to your computer.
Therefore, when faced with issues within your PC that produce errors and slow down performance, it is always wise to turn to a product, such as RegCure, to maintain and repair systems errors on your personal computer.
Partitioning in computer systems refers to dividing of the storage space of hard disk in to various logical drives often called partitions. By partitioning your technique, you can make definite that the technique files and the program files are well separated by information files. Also, with the technique drive separated from other partitions there is space for the operating technique to perform virtual memory paging and swapping. In addition, if one of the partitions gets corrupted then other partitions do not get affected by this. And a partition can get affected (or corrupted) because of several reasons such as virus infections, power outages, abrupt technique shutdown, missing technique files, etc. In such cases, you ought to take appropriate corrective measures to resolve this issue. However, in case you are unable to do so, then you ought to make use of a third-party partition recovery application to recover partition.
